Skip to content
Perpium
Elysium mainnet
BTC59,606-5.18%ETH1,654-6.79%SOL68.03-7.56%HYPE60.83-10.22%DOGE0.0536-8.06%WIF0.1189-9.48%FARTCOIN0.0764-9.38%PUMP0.002339-12.13%LINK8.33-7.40%AVAX6.45-6.94%SUI0.6501-8.57%APT0.3769-8.87%BTC59,606-5.18%ETH1,654-6.79%SOL68.03-7.56%HYPE60.83-10.22%DOGE0.0536-8.06%WIF0.1189-9.48%FARTCOIN0.0764-9.38%PUMP0.002339-12.13%LINK8.33-7.40%AVAX6.45-6.94%SUI0.6501-8.57%APT0.3769-8.87%
Docs

How Perpium works

The periodic table of coins, and the rules that move each coin's fees, in plain words.

Overview

Perpium turns every coin into an element on a periodic table, built for Elysium, Kinetiq's chain beside HyperCore, and for the Ascend launchpad. Each coin gets its own sub-wallet. Its creator fees land there, and every 15 seconds the engine splits them: one share funds the coin's leveraged perp position, and the rest goes to the treasury, the creator, buybacks, stakers and holders. Positions run on Hyperliquid perps and HIP-3 markets.

  • ChainElysium mainnet
  • LaunchpadAscend
  • Perp venueHyperliquid
  • GasHYPE
  • Leverageup to 5×
  • Engine shareat least 25%

The fee loop. Trades on the coin's pool pay fees into the coin's own sub-wallet. The engine splits them by the Balanced preset: Engine 30%, Treasury 20%, Creator 15%, Buyback 10%, Stakers 15%, Holders 10%. The engine share is margin for a perp position on Hyperliquid; its realized profit is shared (retained = stays in the engine as margin): treasury 50%, stakers 20%, holders 5%, retained 25%. The buyback share buys the coin in the coin's pool, which closes the loop. New fee funding reaches Hyperliquid perps.

Reading the table

Element a coin
Every coin launched or routed through Perpium.
Atomic number launch order
1 is the first coin listed; numbers never repeat.
Symbol the ticker
The big letters on the tile.
Mass market cap
The latest sampled price times the supply.
Charge the perp position
Its market, its leverage and its side: BTC 3× ↑ is a 3× long on BTC.
Reaction fees routed
The creator fees that feed the coin's engine.
Group the asset class
The colour of the tile: crypto, stocks and RWA, or FX and commodities.
Ascended Ascend's recognition
A stage on Ascend's lifecycle. Perpium does not read it from Ascend yet, so real coins show Launched.

Launch on Ascend

Ascend launches coins straight into closed hook pools, with no bonding curve, paired with USDC, HYPE, KNTQ, UBTC, wNVDAx, wQQQx or wSPYx. Perpium coins pair with USDC or HYPE (wrapped as WHYPE), KNTQ, UBTC, wNVDAx, wQQQx or wSPYx. With Perpium, the creator's share of Ascend's fee goes to the coin's sub-wallet and funds its engine. Launching on Ascend is open; the coin's fees go to its own sub-wallet. New fee funding reaches Hyperliquid perps.

  1. 1

    Make the coin on Ascend

    A name, a ticker and an image; Ascend creates the pool and its launch liquidity.

  2. 2

    Set its charge

    A market, long or short, and leverage up to 5×.

  3. 3

    Route the creator share

    Point the creator fee share at the coin's sub-wallet and pick a fee preset.

  • Ascend's fee

    The creator picks it at launch: 1% to 10% of every trade, fixed for life. The creator's part reaches the coin's creator escrow, and that is what Perpium splits. On a 1% fee it is 0.35% of each trade below a $40k market cap, 0.5% from $40k to $1M, 0.55% from $1M to $10M, 0.6% from $10M to $50M and 0.75% above $50M. Every point of fee above 1% goes to the creator too. From $40k up, another 0.05% of each trade is coin support, a standing bid in the coin's own pool. Below $40k only 10% of the whole fee is paid as trades happen; the rest is held until the coin holds $40k for an hour. Ascend forfeits it if that does not happen within 14 days, or if the coin sits under a $5k market cap with under $1k a day of volume for 7 days in a row. A forfeited coin earns no more fees: from then on its whole share goes to Ascend's buybacks, and nothing reaches its engine, treasury, creator, stakers or holders. There is no way back, because Perpium launches do not opt into Ascend's community takeover. Ascend's own revenue: 10% treasury, 72% buys KNTQ, 18% buys HYPE.

  • Pairs and coin types

    Ascend offers USDC, HYPE, KNTQ, UBTC, wNVDAx, wQQQx and wSPYx pairs, and coin types: Vanilla, Holder Rewards, Buyback or a custom mix. Perpium coins launch as the Vanilla type, paired with USDC or with HYPE (wrapped as WHYPE), KNTQ, UBTC, wNVDAx, wQQQx or wSPYx; Perpium's presets do the splitting between the engine, buybacks, stakers and holders. A coin paired with something other than USDC gets its fees in that asset, and its split, treasury and payouts stay in it. Its perp share is converted to USDC by hand by an operator, so its perp is funded on that cadence rather than every tick. Its stakers are paid in the pair asset itself.

  • The fee book is the pair asset

    Ascend pays fees in the pool's pair asset, and a coin's fee book is kept in that asset, never converted at receipt: a USDC coin's split, payouts and community figures are in USDC; a HYPE coin's are in WHYPE, a KNTQ coin's are in KNTQ, a UBTC coin's are in UBTC, a wNVDAx coin's are in wNVDAx, a wQQQx coin's are in wQQQx and a wSPYx coin's are in wSPYx, with dollar values shown only as a guide.

  • Ascended

    Ascend's mark for coins that qualify for its extra support: it buys them and features them. It weighs market cap, holders, volume and accumulation checks, and publishes no thresholds. An element's page shows the badge.

The fee split

A coin launches with one of three presets. Each gives the treasury 20% and the creator 15%; they differ in the engine, buyback, stakers and holders. The split is the coin's reaction: it runs on every claim.

BalancedDefault

30% engine10% buyback15% stakers

Max backing

50% engine0% buyback10% stakers

Staker rewards

25% engine5% buyback30% stakers
  • The engine never gets less than 25%, and stakers never less than the staking floor (10% by default).
  • Buyback: the whole share buys the coin in its own pool. There is no LP leg: Ascend's launch pools take no outside liquidity.
  • The creator can change the split at most once every 7 days. Changes apply to future fees only and stay in the coin's public history.

When the position takes profit

Realized profit, once earlier losses are recovered, is split again:

The perp engine

The engine share is margin for one position, the coin's charge, on its market: long or short, at up to 5× (less where the venue caps that market lower). Positions run on Hyperliquid perps and HIP-3 markets. New fee funding reaches Hyperliquid perps.

  • Take-profit

    At +50% of collateral the engine closes 25% of the position, at most once every 6 hours.

  • Drawdowns add margin

    Underwater, new fees keep adding collateral; the coin is never sold to cover a loss. A position ends only by liquidation, a stop loss or a close.

  • Creator controls

    The creator can tune the take-profit (trigger 1–500%, close 1–95%), set stop losses, change leverage (up to 5×), flip, close and resume. Every action is signed, and none can move money out.

Stakers and holders

Stakers

Stake the coin in its farm for 1 to 30 days. The stakers' share of fees and 20% of realized profit fund the rewards. Staked coins still count as held for the holders' share.

Holders

The holders' share of fees (10% on Balanced) and 5% of realized profit. It accrues for now and is paid to wallets, in proportion to what each holds, once holder payouts are switched on. Pools and protocol addresses are left out; amounts too small to send roll over.

Staking is live on Elysium. Until a coin's own farm is set up, its stakers' share accrues for it, and holders' shares accrue until they are paid. Nothing is redirected.

HYPE alignment

  • The treasury holds HYPE and KNTQ live

    The treasury share is paid in the coin's fee asset (USDC, or its pair asset: HYPE, KNTQ, UBTC, wNVDAx, wQQQx or wSPYx). Perpium converts it into HYPE and KNTQ by hand; the engine does not swap it.

  • Ascend buys HYPE Ascend's

    Ascend's own revenue buys KNTQ (72%) and HYPE (18%), and half the HYPE is meant to be staked. That is Ascend's design, not Perpium's.

  • Charges on Hyperliquid live

    Each coin's position runs on Hyperliquid perps or a HIP-3 market. New fee funding reaches Hyperliquid perps.

Transparency

Fees are claimed into, and paid out of, the coin's own sub-wallet, so the money trail is on-chain. Each element's community page shows:

  • Fees received, and how much went to each share
  • Payouts, buybacks and farm funding, and what each share holds now
  • The market, the position, its harvests and any losses carried
  • The split in force and every change to it, in an append-only history
  • The engine's latest events, each transaction linked to the chain's explorer

Follow along

Technical Documentation and Integration Guides

The official documentation hub provides developers, liquidity managers, and platform integrators with detailed technical references, contract interfaces, deployment guides, and SDK documentation.

Smart Contract Architecture and Core Interfaces

Explore comprehensive documentation for the Factory, Router, Element Engine, and FeeSplitter contracts. Each interface includes complete NatSpec documentation, ABI definitions, and code examples for seamless integration into third-party dApps.

Integration Walkthroughs and Best Practices

Step-by-step guides walk developers through launching elements programmatically, subscribing to 15-second engine events, integrating portfolio data feeds, and deploying automated market-making bots on Elysium.

Frequently Asked Questions

Where can I find the official contract addresses?

All deployed factory and router addresses are listed with verified block explorer links in the core contracts section of this documentation.

What programming languages are supported by the client SDK?

The protocol offers full TypeScript, JavaScript, and Python SDKs for programmatic interaction and event listening.

Are the smart contracts audited by independent firms?

Yes, contract source codes undergo comprehensive independent security audits with public reports available in the security archive.